Pentax 17191 V20 Operating Manual - Page 24
Powering the Camera, Charging the Battery
UPC - 027075139701
View all Pentax 17191 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Powering the Camera Getting Started 1 Charging indicator While charging: Lights Charging finished: Turns off 2 To power outlet 3 Battery Battery charger 1 AC plug cord Charging the Battery Use the battery charger to charge the battery before using it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears. Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)" 1 Connect the AC plug cord to the battery charger D-BC78. 2 Plug the AC plug cord into the power outlet. 3 Place the battery in the charger so that the PENTAX logo is facing up. The charging indicator lights while the battery is charging and turns off when charging is finished. 4 Remove the battery from the battery charger when charging is finished. • The time required to fully charge the battery is about 150 minutes (max.). The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F). (The charging time may vary depending on the ambient temperature and charging conditions.) • The battery has reached the end of its service life when it starts to run down soon after being charged. Replace with a new battery. • Do not use the battery charger to charge batteries other than the rechargeable lithium-ion battery D-LI78, as the charger may overheat or be damaged. • If the battery is inserted correctly but the charging indicator fails to light, the battery may be faulty. Replace with a new battery. 22