Pentax 17191 V20 Operating Manual - Page 42

Quick Start Taking Still Pictures Power switch Zoom/w/x lever Shutter release button 2 Quick Start The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions. 1 Press the power switch. 38 The camera turns on and is ready to take still pictures. In this manual, this is called Still Picture Capture mode. 2 Confirm the subject and shooting information on the display. 03/03/2008 14:25 The focus frame in the middle of the display indicates the zone of automatic focusing. Focus frame You can change the captured area by turning the Zoom/w/x lever to the left or right. x : enlarges the subject w : widens the area that is captured by the camera 3 Press the shutter release button halfway. The focus frame on the display turns green if the subject is in focus. 4 Press the shutter release button fully. The picture is taken. The image appears on the display for one second (Instant Review) and is saved to the SD Memory Card or built-in memory. (p.41) Press the Green button to switch to the 9 (Green) mode and let the camera set all the shooting functions automatically. Selecting the 9 mode is the easiest way to ensure that pictures come out well. (p.63) 40