Pentax 17191 V20 Operating Manual - Page 195
Problem, Cause, Remedy, Flash On. p.89
UPC - 027075139701
View all Pentax 17191 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Problem Cause Remedy The subject is not in focus The subject is difficult to focus on with autofocus The subject is not in the focusing area The camera may have difficulty in focusing on such subjects as: low contrast subjects (a white wall, a blue sky, etc.), dark subjects, finely-patterned objects, rapidly-moving objects. It is also difficult to get proper focus when shooting through a window or a net. Try shooting using the focus lock (p.41), or Manual Focus (p.88). Locate the desired subject in the focus frame (focusing area) in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (focus lock), and then move the camera to recompose. The subject is too close Set the focus mode to q. (p.87) The focus mode is set Normal pictures will be out of focus if to q taken with the focus mode set to q. The flash mode is set to a (flash off) Set to Auto or b (Flash On). (p.89) The drive mode is set The flash does not to 1 discharge The focus mode is set The flash does not discharge in these to s modes. The shooting mode is set to C or F The USB connection with a The USB connection personal computer setting of the camera does not function is set to [PictBridge] properly Set the USB connection setting to [PC]. (p.171) The USB connection with a printer does not function properly The USB connection setting of the camera is set to [PC] Set the USB connection setting to [PictBridge]. (p.152) 9 Very occasionally, static electricity may cause camera malfunction. In this case, remove the battery and install it again. If the camera is then working properly, normal condition is restored and you can continue using the camera. Appendix 193