Pfaff 339 Owner's Manual - Page 51

Satin Stitch. Universal sewing foot 847580 Control cam: on zigzag stitch. Stitch length: almost 0. Zigzag width: 2-4 (most effective with 4). Upper tension: slightly weaker than normal. Bobbin ten sion: slightly stronger than normal (for further par ticulars see page 24 "Regulating the Thread Ten- Si Ofl For upper and bobbin thread use machine embroi dery and darning cotton No. 50. The stitches must be laid close together without visible gaps; it is, therefore, essential to set the stitch length almost to 0 (see also page 21). Cording Universal sewing foot 847580 Upper and bobbin thread: machine embroidery and darning cotton No. 50. Use cotton gimp. Upper tension: normal. Bobbin tension: slightly stronger than usual (see pages 24 and 25). Zigzag width: 2. Stitch length: almost 0 (see also "Gimp Buttonhole", page 44). Needle position: left. Place the gimp thread on the fabric under the left groove of the sewing foot to the back and zigzag-stitch over it. You may also use piping foot 847682 (as on page 59). If you do, you must sew with centre needle position as the gimp will be placed under the centre groove of the foot. 53