Pfaff 339 Owner's Manual - Page 55
Piping
View all Pfaff 339 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
. Piping rhe piping attachment is available upon equest and against reasonable extra :hcrge. It comprises: piping head 847650 machine needles system 1844 5 needles Fl 5 needles Fr left-hand needle riah-hand needle icot 87 665 with one narrow groove width of groove 1/16") piping foot 847 667 with five medium-wide Drooves (width of groove 3/32") n;pinp foot 847 666 with one wide groove width of groove 1/8") special screwdriver 847 262 for piping head needle plate with guide slot for qimp hreod(. /cer and bobbin thread for narrow iping: machine embroidery and darning :otton No. 50; for medium-wide and wide liping: sewing silk. Gimp thread: cotton. (obbin tension: normal. Upper tension: ttNer slightly weaker or stronger than tcrnal to suit material in hand. On the vrDng side of the material, the bobbin hred must appear as if a narrow zigzag titch. Setting the Machine Control cam on straight stitch. Stitch length: normal i 5 / 6 4" to 1/8"). Needle po sition: centre. Zigzag lever and lock disc on 0. Bring the thread take-up lever to its high est position and with the help of the screwdriver loosen the screw on the needle clamp (above the needle fastening screw) and carefully draw the needle clamp down and off the bar. Now take the piping head and loosen both screws on its front side. Push both needles up as far as they will go (with the long groove facing you) and tighten the screws again. Now slide the head up onto the needle bar until it stops and tigh ten the thumb screw. 57