Pfaff hobby 1022 Owner's Manual - Page 16

Preparing the machine for bobbin, winding, Mounting the bobbin, Switch off the master switch 12,

Get Pfaff hobby 1022 PDF manuals and user guides View all Pfaff hobby 1022 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Operating the machine Preparing the machine for bobbin winding Pull the handwheel (7) fully to the right. This will prevent the needle moving while the machine is winding the bobbin. Mounting the bobbin Switch off the master switch (12) Place the empty bobbin onto the pin of the bobbin winding mechanism and press it down as far as possible. Push the bobbin to the right. Note: The bobbin can only be wound if it is moved fully to the right. Winding the bobbin Pull the spool holder (5) up and place a spool on it. Place the thread clockwise into the bobbin winder tension (2) and run it to the bobbin. Wind the thread clockwise around the bobbin several times. Turn the master switch (12) on and press the foot pedal. Let go of the thread after a few revolutions. As soon as the bobbin is full the winding action will be stopped automatically. Press the full bobbin to the left and remove it from the pin. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Operating the machine
12
Preparing the machine for bobbin
winding
Pull the handwheel (7) fully to the right.
This will prevent the needle moving while
the machine is winding the bobbin.
Mounting the bobbin
Switch off the master switch (12)
Place the empty bobbin onto the pin of
the bobbin winding mechanism and press
it down as far as possible. Push the bob-
bin to the right.
Note:
The bobbin can only be wound if
it is moved fully to the right.
Winding the bobbin
Pull the spool holder (5) up and place a spool on it.
Place the thread clockwise into the bobbin winder tension (2) and run it to the bobbin.
Wind the thread clockwise around the bobbin several times.
Turn the master switch (12) on and press the foot pedal.
Let go of the thread after a few revolutions. As soon as the bobbin is full the winding
action will be stopped automatically. Press the full bobbin to the left and remove it from
the pin.