Pfaff hobby 1022 Owner's Manual - Page 24
tween 2 and 3. See
View all Pfaff hobby 1022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating the machine Changing the needle Switch off the master switch (12). To remove: Lower the presser foot and set the needle to its highest point. Loosen the Àxing screw (23) and pull the needle downwards. To insert: The Áat side A of the needle A must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it will go. Hold the needle and tighten the Àxing screw (23) Àrmly. Setting the needle thread tension Set the required amount of the needle thread tension (3) using the markings on the tension dial. The normal setting for sewing is 4-5. For embroidery and buttonhole sewing between 2 and 3. (See page 15) AB Lowering the feed dog For certain sewing work, such as sewing on buttons, the feed dog (22) has to be lowered. To do this, open the hook cover (19) and move the metallic slide to the right-hand position (B) by pushing it downwards and then to the right. To engage the feed dog, push down the slide and lock it into the left-hand position (A). 20