Pfaff hobby 1022 Owner's Manual - Page 17

Winding a bobbin through the needle, Bobbin winder tension, t forget

Get Pfaff hobby 1022 PDF manuals and user guides View all Pfaff hobby 1022 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Operating the machine Bobbin winder tension Pass the thread through the bobbin thread tension (2) in a clockwise direction, so that it crosses over itself on the way to the bobbin. Winding a bobbin through the needle It is possible to wind bobbins even when the machine is threaded. Raise the presser bar lifter (26) to the top position. Pull the thread underneath the presser foot. Pull the thread upward through the left-hand threader slot (18). Place the thread from left to right through the take-up lever (28). Wind the beginning of the thread several times around the bobbin in a clockwise direction. Hold the end of the thread Àrmly and press the foot pedal. Tip: While winding the bobbin, gently push down the front of the presser foot with your finger. Don·t forget: After winding a bobbin, press the handwheel (7) back to the left! 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Operating the machine
13
Winding a bobbin through the needle
It is possible to wind bobbins even when
the machine is threaded. Raise the press-
er bar lifter (26) to the top position. Pull
the thread underneath the presser foot.
Bobbin winder tension
Pass the thread through the bobbin
thread tension (2) in a clockwise direction,
so that it crosses over itself on the way to
the bobbin.
Pull the thread upward through the left-hand threader slot (18). Place the thread from
left to right through the take-up lever (28). Wind the beginning of the thread several
times around the bobbin in a clockwise direction. Hold the end of the thread
À
rmly and
press the foot pedal.
Tip:
While winding the bobbin, gently push down the front of the presser foot with
your finger.
Don
·
t forget:
After winding a bobbin, press the handwheel (7) back to the left!