Pfaff hobbylock 2.5 Owner's Manual - Page 10
thread overlock converter, Stitch, nger lever setting - 0 3 thread rolled edge
View all Pfaff hobbylock 2.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2-thread overlock converter A Engaging Turn off the main power switch and unplug the machine. 2-thread overlock stitches are sewn using one needle B thread and the lower looper thread. Before sewing, the 2-thread converter must be attached to the upper looper. The 3-thread stretch overlock stitch is also sewn with the 2-thread overlock converter engaged. • Open the front cover. • Raise the white handle on the 2-thread converter to insert the sharp edge (A) of the converter in the eye (B) of the upper looper. Disengaging Turn off the main power switch and unplug the machine. • Lower the white handle on the converter and remove the sharp edge (A) from the eye (B) of the upper looper. Stitch finger lever setting N R The stitch finger lever should be set to N for all standard overlock sewing. To sew rolled edge you need to retract N N R the stitch finger by setting the stitch finger lever to R. R When moving the stitch finger lever, be sure to push the lever as far as it will go in each direction. 10 Preparations