Pfaff hobbylock 2.5 Owner's Manual - Page 22

Flatlock sewing

Page 22 highlights

Flatlock sewing A flatlock stitch is made by sewing the seam and pulling the fabric apart to flatten the seam. The flatlock stitch can be used both as a decorative construction stitch, sewing two pieces together (Standard flatlock stitch), or for embellishment on only one piece of fabric (Ornamental flatlock stitch). There are two ways to sew a flatlock stitch. Either with the wrong sides of the fabric together to create a decorative look, or with the right sides together, to create a ladder stitch. Standard flatlock stitch • Use the left or the right needle. • For 2-thread flatlock: Engage the 2-thread converter (see page 10). Thread the lower looper and the left (A) or right (B) needle. For 3-thread flatlock: Thread the lower and upper looper and the left (A) or right (B) needle. • Set the ATD to E for 2-thread flatlock and to F for 3-thread flatlock. • Place the wrong sides of the two pieces of fabric together to sew a decorative stitch on the right side of the garment. • Sew the seam, trimming the excess fabric. The needle thread will form a V on the underside of the fabric. The lower looper thread will pull into a straight line at the fabric edge. • Unfold the fabric and pull on opposite sides of the seam to pull the stitches flat. Standard flatlock stitch Ornamental flatlock stitch Ornamental flatlock stitch • Place the movable upper cutter in the B position (see page 9). The fabric should not be trimmed on this stitch. • Follow steps 1-3 above. • Fold the fabric piece, wrong sides together, to sew a decorative stitch from the right side of the garment (at the fold). • Position the fabric so the seam is sewn with part of the stitch extending off the fabric. • Unfold the fabric and pull on opposite sides of the stitch to flatten. Tip: The upper looper thread is the prominent thread in the flatlock stitch. Place a decorative thread in the upper looper and regular threads in the lower looper and needle. Ladder stitch To create a ladder stitch, sew with right sides of the fabric together. The needle thread will be the prominent thread that creates the ladder. 3-thread ladder stitch 22 Stitches & sewing techniques

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

22
Stitches & sewing techniques
Flatlock sewing
A
atlock stitch is made by sewing the seam and pulling the fabric apart to
atten the seam. The
atlock stitch
can be used both as a decorative construction stitch, sewing two pieces together (Standard
atlock stitch), or for
embellishment on only one piece of fabric (Ornamental
atlock stitch).
There are two ways to sew a
atlock stitch. Either with the wrong sides of the fabric together to create a decorative
look, or with the right sides together, to create a ladder stitch.
Standard
atlock stitch
• Use the left or the right needle.
For 2-thread
atlock:
Engage the 2-thread converter
(see page 10). Thread the lower looper and the left (A)
or right (B) needle.
For 3-thread
atlock:
Thread the lower and upper
looper and the left (A) or right (B) needle.
• Set the ATD to E for 2-thread
atlock and to F for
3-thread
atlock.
• Place the wrong sides of the two pieces of fabric
together to sew a decorative stitch on the right side of
the garment.
• Sew the seam, trimming the excess fabric. The needle
thread will form a V on the underside of the fabric. The
lower looper thread will pull into a straight line at the
fabric edge.
• Unfold the fabric and pull on opposite sides of the
seam to pull the stitches
at.
Ornamental
atlock stitch
• Place the movable upper cutter in the B position (see
page 9). The fabric should not be trimmed on this
stitch.
• Follow steps 1-3 above.
• Fold the fabric piece, wrong sides together, to sew a
decorative stitch from the right side of the garment (at
the fold).
• Position the fabric so the seam is sewn with part of the
stitch extending off the fabric.
• Unfold the fabric and pull on opposite sides of the
stitch to
atten.
Tip: The upper looper thread is the prominent thread in the
atlock stitch. Place a decorative thread in the upper looper and
regular threads in the lower looper and needle.
Ladder stitch
To create a ladder stitch, sew with right sides of the fabric
together. The needle thread will be the prominent thread
that creates the ladder.
Standard
atlock stitch
Ornamental
atlock stitch
3-thread ladder stitch