Philips DVD704AT98 User manual - Page 11
Preparation
View all Philips DVD704AT98 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparation General Notes ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. ¶ Please refer to the manuals of your TV,VCR, Stereo System or other devices as necessary to make the best connections. ¶ For better sound reproduction, connect the player's audio out jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See 'Connecting to optional equipment.' Caution: - Make sure the DVD Player is connected directly to the TV. Set the TV to the correct video input channel. - Do not connect the DVD Player's audio out jacks to the phono in jack of your audio system. - Do not connect your DVD Player via your VCR.The DVD image could be distorted by the copy protection system. Connecting to a TV ¶ Make one of the following connections, depending on the capabilities of your existing equipment. ¶ When using the COMPONENT VIDEO OUT jacks, set the VIDEO OUTPUT switch to COMPONENT. When using the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to S-VIDEO. Component Video (PB/CB PR/CR Y) connection 1 Connect the PB/CB PR/CR Y COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using an optional PB/CB PR/CR Y cable (Z). 2 Connect the Left and Right AUDIO OUT jacks (1 or 2) of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. S-Video (Y/C) connection 1 Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using an optional S-Video cable (Y). 2 Connect the Left and Right AUDIO OUT jacks (1 or 2) of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. Video (CVBS) connection 1 Connect the VIDEO OUT jack on the DVD Player to the video in jack on the TV using the video cable supplied (X). 2 Connect the Left and Right AUDIO OUT jacks (1 or 2) of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. TV Y Z AX PREPARATION 11