Philips DVD704AT98 User manual - Page 12
Connecting to Optional, Equipment
View all Philips DVD704AT98 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround 1 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 or DTS) 1 Connect one of the DVD Player's DIGITAL AUDIO OUT jacks (OPTICAL G or COAXIAL F) to the corresponding in jack on your amplifier. Use an optional digital (optical G or coaxial F) audio cable. 2 You will need to activate the player's digital output (see 'Personal Preferences' on page 14). AMPLIFIER Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby DigitalTM and DTS). Check the receiver manual and the logos on the front of the receiver. Warning: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Notes: - If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. - Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. - To see the audio format of the current DVD in the OnScreen Display, press the AUDIO button. G F A Y Z X TV 12 PREPARATION