Philips MCM8 User manual - Page 18

English Disc Operations Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. Checking the program 1 Stop playback and press í or ë repeatedly. 2 Press ÉÅ to start playback from the current programmed track. CD PROGRAM 1 STANDBY-ON ECO POWER CLOCK RDS/ NEWS OPEN / CLOSE MP3-CD / CD-R / CD-RW COMPATIBLE MICRO SYSTEM MP3-CD / CD-R / CD-RW COMPATIBLE IR Clearing the program 2 ● Stop playback, then press Ç to clear the 3, 5 program. 4 OR Press the OPEN/CLOSE 0 button of the 6 disc tray. ➜ PROG disappears from the display and 7 "PROGRAM CLEARED" appears. 1 Load the desired disc on the disc tray (refer to "Loading disc".) 2 Press CD to select a disc. 3 Press PROGRAM to start programming. ➜ PROG starts flashing. 4 Press í or ë repeatedly to select the desired track. ● For MP3 disc, press à / á and í / ë to select the desired album and title for programming. 5 Press PROGRAM to store. ● Repeat steps 4~5 to select other tracks. ➜ If you attempt to program more than 99 tracks, "PROGRAM FULL" appears. 6 To start program play, press ÉÅ. 7 To stop playback or to end the programming, press Ç once. ➜ PROG stays and the program mode remains active. Helpful Hint: - If the system is disconnected from the power supply or you switch to other source mode, the program will be erased. Helpful Hints: - If the total playing time reached 100 minutes or if one of the programmed tracks has a number greater than 30, then "--:--" will appear instead of the total playing time. - The system will exit programming mode if no button is pressed within 20 seconds. 18