Pioneer AVH-P2300DVD Owner's Manual - Page 47
Menu operations
UPC - 884938124508
View all Pioneer AVH-P2300DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Menu operations Section 13 Menu operations 3 Touch c or d to select the desired item. Powerful-Natural-Vocal-Custom1- Custom2-Flat-Super Bass 4 Touch the Equalizer band to adjust. 5 Touch a or b to adjust the level of the equalizer band. Range: +12dB to -12dB # You can then select another band and adjust the level. Adjusting loudness Loudness compensates for deficiencies in the low- and high-frequency ranges at low volume. 1 Display the audio function menu. Refer to Introduction of menu operations on page 45. 2 Touch Loudness on the audio function menu. 3 Touch c or d to select a desired level. Off (off)-Low (low)-Mid (mid)-High (high) Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. ! The cut-off frequency and output level can be adjusted when the subwoofer output is on. 1 Display the audio function menu. Refer to Introduction of menu operations on page 45. 2 Touch Subwoofer on the audio function menu. 3 Touch On or Off next to Subwoofer to turn the subwoofer output on or off. 4 Touch Normal or Reverse next to Phase to select the phase of subwoofer output. 5 Touch c or d next to Level to adjust the output level of the subwoofer. Range: +6 to -24 6 Touch c or d next to Frequency to select the cut-off frequency. 50Hz-63Hz-80Hz-100Hz-125Hz Only frequencies lower than those in the selected range are outputted from the subwoofer. Boosting the bass You can boost the bass level. 1 Display the audio function menu. Refer to Introduction of menu operations on page 45. 2 Touch c or d to select a desired level. Range: 0 to +6 Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Display the audio function menu. Refer to Introduction of menu operations on page 45. 2 Touch c or d next to Frequency to select cut-off frequency. Off (off)-50Hz-63Hz-80Hz-100Hz- 125Hz Only frequencies higher than those in the selected range are output from the front or rear speakers. En 47