Pioneer DEH P410UB Owner's Manual - Page 26
Audio Adjustments, Adjusting equalizer curves
UPC - 012562941363
View all Pioneer DEH P410UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Section 03 Audio Adjustments Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting is memorized in CUSTOM. ! When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. 1 Use MULTI-CONTROL to select PRESET EQUALIZER in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Turn MULTI-CONTROL to select the equalizer. # You can also perform the same operations by pushing MULTI-CONTROL up or down. Adjusting equalizer curves The factory supplied equalizer curves can be adjusted to a fine degree (nuance control). 1 Use MULTI-CONTROL to select EQ SETTING 1 in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch the segment in the following order: L (low)-M (mid)-H (high) 4 Turn MULTI-CONTROL to adjust the level of the equalization band. +6 to -6 is displayed as the level is increased or decreased. # You can also perform the same operations by pushing MULTI-CONTROL up or down. # You can then select another band and adjust the level. Fine-adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HI). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Use MULTI-CONTROL to select EQ SETTING 2. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch the segment in the following order: Band-Frequency-Q factor 4 Turn MULTI-CONTROL to adjust the selected segement. Band LOW (low)-MID (mid)-HI (high) Frequency Low: 40HZ-80HZ-100HZ-160HZ Mid: 200HZ-500HZ-1KHZ-2KHZ High: 3KHZ-8KHZ-10KHZ-12KHZ Q factor 2N-1N-1W-2W # You can also perform the same operations by pushing MULTI-CONTROL up or down. 26 En