Pioneer DEH P410UB Owner's Manual - Page 51

Available accessories Section 06 English TV tuner Basic Operations You can use this unit to control a TV tuner, which is sold separately. For details concerning operation, refer to the TV tuner's operation manual. This section provides information on TV operations with this unit, which differs from that described in the TV tuner's operation manual. % Select a band Press BAND/ESC. % Select a channel (step by step) Push MULTI-CONTROL left or right. % Seek tuning Push and hold MULTI-CONTROL left or right, and then release. Notes ! Band can be selected from TV1 or TV2. ! You can cancel seek tuning by pushing MULTI-CONTROL left or right. ! While pushing and holding MULTI-CONTROL left or right, you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL. Storing and recalling broadcast stations You can easily store up to 12 broadcast stations for later recall. ! 12 stations for each band can be stored in memory. 1 Press LIST. Preset screen is displayed. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number. Press and hold to store. # You can also store the station in memory by pushing and holding MULTI-CONTROL right. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display. Storing the strongest broadcast stations sequentially 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL and select FUNCTION to display BSSM. # You can also select the function by pressing FUNCTION on the remote control. 3 Press MULTI-CONTROL to turn BSSM on. SEARCH begins to flash. While SEARCH is flashing, the 12 strongest broadcast stations are stored in order from the lowest channel up. When finished, the preset channel list appears. # To cancel the storage process, press MULTI-CONTROL again. 4 Use MULTI-CONTROL to select the desired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # To return to the channel display, press BAND/ESC. # If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display. En 51