Pioneer DEH11E Owner's Manual - Page 13
Fastening the front panel, Installation
UPC - 012562945255
View all Pioneer DEH11E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Section 04 English Removing the unit 1 Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) 2 Determine the appropriate position where the holes on the bracket and the side of the unit match. Trim ring ! It becomes easy to remove the trim ring if the front panel is released. 2 Insert the supplied extraction keys into both sides of the unit until they click into place. 3 Pull the unit out of the dashboard. 3 Tighten two screws on each side. Screw Mounting bracket Dashboard or console ! Use either truss screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of screw holes in the bracket. DIN Rear-mount 1 Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) Fastening the front panel If you do not plan to detach the front panel, the front panel can be fastened with supplied screw. Screw Trim ring ! It becomes easy to remove the trim ring if the front panel is released. En 13