Pioneer DEH11E Owner's Manual - Page 6

Section 02 Operating this unit Basic Operations Power ON/OFF Turning the unit on % Press SOURCE to turn the unit on. Turning the unit off % Press SOURCE and hold until the unit turns off. Selecting a source You can select a source you want to listen to. % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources. Tuner-Built-in CD player-AUX Notes ! In the following cases, the sound source will not change. - When there is no disc in the unit. - When AUX (auxiliary input) is set to off (refer to page 9). ! AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxiliary setting on page 9). ! When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. Adjusting the volume % Turn VOLUME to adjust the sound level. Tuner Listening to the radio 1 Press SOURCE to select the tuner. 2 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed. 3 To perform manual tuning, briefly press c or d. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by briefly pressing c or d. # While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d. Storing and recalling broadcast frequencies % When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. Memorized radio station frequency can be recalled by pressing the preset tuning button. # Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. # Press a or b to recall radio station frequencies. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. 2 Press a or b to turn local seek tuning on or off. 3 Press c or d to set the sensitivity. FM: LOCAL 1-LOCAL 2-LOCAL 3- LOCAL 4 AM: LOCAL 1-LOCAL 2 6 En