Pioneer DEH11E Owner's Manual - Page 7

Operating this unit Section 02 English The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequencies with the touch of button. ! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. 1 Press FUNCTION to select BSM. 2 Press a to turn BSM on. The six strongest broadcast frequencies are stored in the order of their signal strength. # To cancel the storage process, press b. Built-in Player Playing a disc 1 Insert a CD into the CD loading slot. Playback will automatically start. # Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT. 2 To perform fast forward or reverse, press and hold c or d. 3 To skip back or forward to another track, press c or d. Notes ! Read the precautions for discs and player on page 14. ! If an error message such as ERROR-11 is displayed, refer to Error messages on page 14. Repeating play Repeat play lets you hear the same track over again. 1 Press FUNCTION to select RPT. 2 Press c or d to select the repeat range. DSC - Repeat all tracks TRK - Repeat the current track # If you perform track search or fast forward/reverse, repeat play is automatically cancelled. # To return to the normal display, press BAND. Playing tracks in random order Random play lets you play back tracks on the CD in a random order. 1 Press FUNCTION to select RDM. 2 Press a or b to turn random play on or off. When random play is on, RDM appears in the display. # To return to the normal display, press BAND. Scanning tracks of a CD Scan play lets you hear the first 10 seconds of each track on the CD. 1 Press FUNCTION to select SCAN. 2 Press a to turn scan play on. SCAN appears in the display. The first 10 seconds of each track is played. 3 When you find the desired track press b to turn scan play off. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. # After scanning of a CD is finished, normal playback of the tracks will begin again. Pausing disc playback Pause lets you temporarily stop playback of the disc. En 7