Pioneer DJM-T1 Owner's Manual - Page 30

Specifications General Power requirements AC 120 V, 60 Hz Power consumption 23 W Power consumption (standby 0.4 W Main unit weight 6.1 kg (13.5 lb) Max. dimensions 265 mm (W) × 107.9 mm (H) × 403 mm (D) (10.4 in. (W) × 4.2 in. (H) × 15.9 in. (D)) Tolerable operating temperature 5 °C to +35 °C (+41 °F to +95 °F) Tolerable operating humidity 5 % to 85 % (no condensation) Audio Section Sampling rate...48 kHz A/D, D/A converter 24 bits Frequency characteristic CD...20 Hz to 20 kHz S/N ratio (rated output) PHONO...92 dB CD...106 dB MIC...84 dB Total harmonic distortion (CD - MASTER1 0.004 % Standard input level / Input impedance PHONO 52 dBu/47 kW CD...-12 dBu/47 kW MIC...-52 dBu/47 kW AUX...-12 dBu/29 kW Standard output level / Load impedance / Output impedance MASTER1 6 dBu/10 kW/10 W or lower MASTER2 2 dBu/10 kW/330 W BOOTH 6 dBu/10 kW/10 W or lower PHONES 5.4 dBu/32 kW/10 W or lower Rated output level / Load impedance MASTER1 24 dBu/10 kW MASTER2 20 dBu/10 kW Crosstalk (CD)...86 dB Channel equalizer characteristic HI to +6 dB (13 kHz) MID to +6 dB (1 kHz) LOW to +6 dB (70 Hz) Microphone equalizer characteristic HI 12 dB to +12 dB (10 kHz) LOW 12 dB to +12 dB (100 Hz) Input / Output terminals PHONO input terminal RCA pin jack...2 sets CD input terminal RCA pin jack...2 sets MIC input terminal XLR connector/phone jack (Ø 6.3 mm 1 set AUX input terminal RCA pin jacks...1 set MASTER output terminal XLR connector...1 set RCA pin jacks...1 set BOOTH output terminal TRS phone jack (Ø 6.3 mm 1 set PHONES output terminal Stereo phone jack (Ø 6.3 mm 1 set USB terminal B type...1 set ! The specifications and design of this product are subject to change without notice. ! The software screens used in these operating instructions are from the development stage and may differ from the actual screens. 30 En