Pioneer DV-600AV-S Operating Instructions - Page 53

Additional information 09 Setting the TV system (Except Taiwanese model) The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or region's system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC). 1 If the player is on, press  STANDBY/ ON to switch it to standby. 2 Using the front panel controls, hold down  then press  STANDBY/ON to switch the TV system. The TV system changes as follows: • AUTO  NTSC • NTSC  PAL • PAL  AUTO Note • You have to switch the player into standby (press  STANDBY/ON) before each change. Disc Player setting Type Format NTSC PAL AUTO DVD/Super VCD/Video CD/ DivX video/ WMV NTSC PAL NTSC PAL NTSC NTSC PAL PAL CD/MP3/WMA/ MPEG-4 AAC/ JPEG - no disc NTSC PAL NTSC or PAL Resetting the player Use this procedure to reset all the player's settings to the factory default. 1 Switch the player into standby. 2 Using the front panel buttons, hold down the  (stop) button and press  STANDBY/ON to switch the player back on. All the player's settings are now reset. DVD-Video regions All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. In this case the attention sentence Incompatible disc region number Can't play disc is displayed on screen. Discs marked ALL will play in any player. The diagram below shows the various DVD regions of the world. 1 5 2 1 6 2 3 4 5 2 4 53 En