Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 14
Front Panel, Remote, DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. COMPONENT VIDEO IN jacks: Input the AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) 2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 3. VIDEO IN jacks: Input the AV component video signals with an analog video cable. 4. AUDIO IN jacks: Input AV component audio signal with an analog audio cable. 5. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component. 6. SIGNAL GND terminal: The ground wire of the turntable is connected. 7. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 8. USB port: A USB storage device is connected so that music files stored in it can be played. ( p103) You can also supply power (5 V/0.5 A) to USB devices with a USB cable. 9. NETWORK port: Connect to the network with a LAN cable. 10. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 11. AC IN: The supplied power cord is connected. 12. RS-232C port: Connect a home control system equipped with an RS-232C port. For adopting a home control system, contact the specialized stores. 13. ANTENNA AM LOOP/FM UNBAL 75 Ω terminal: The supplied antennas are connected. 14. IR IN/OUT port: Connect a remote control receiver unit. ( p90) 15. 12V TRIGGER OUT A/B jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( p91) 16. ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to a pre-main amplifier or a power amplifier in a separate room (ZONE 2). ZONE B LINE OUT jacks: Connect to a pre-main amplifier with an analog audio cable, and simultaneously output audio of the same source as that of the speakers (ZONE A) connected to this unit. 17. ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to a pre-main amplifier or a power amplifier in a separate room (ZONE 3). 18. SPEAKERS terminals: Connect speakers with speaker cables. (North American models support banana plugs. Use a plug 4 mm in diameter. Y plug connection is not supported.) 19. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. You can set the volume levels of the 2 powered subwoofers to different levels. ( p162) 20. PRE OUT jacks: Connect a power amplifier. ( p74) 21. VOLTAGE SELECTOR (multi-voltage models): Use a medium-sized screwdriver to switch the voltage to the one appropriate for your region. Before changing the voltage, first disconnect the power cord. 14 Front Panel≫ Rear Panel≫ Remote≫