Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 175

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„Zone 3 Change the settings for Zone 3. Setting Item Output Level Volume Limit Power On Level Bass Treble Balance Default Value Fixed Off Last 0 dB 0 dB 0 Setting Details Select whether to adjust the volume on the premain amplifier in the separate room or on this unitwhen outputting to Zone 3. "Fixed": Adjust on the pre-main amplifier in the separate room "Variable": Adjust on this unit Set the maximum value for Zone 3 to avoid too high volume. Select "Off" or a value between "-32 dB" and "+17 dB". Set the Zone 3 volume level of when this unit is turned on. Select a value from "Last" (volume before the unit was turned off), "-∞ dB", and "-81.5 dB" to "+18.0 dB". • You cannot set a higher value than that of "Volume Limit". Adjust the volume of the bass for Zone 3. Select a value between "-10 dB" and "+10 dB". Adjust the volume of the treble for Zone 3. Select a value between "-10 dB" and "+10 dB". Set the left-right balance for Zone 3. Select a value between "L + 10" to "R + 10". „„Remote Play Zone Change the settings for remote play. Setting Item Remote Play Zone Default Value Auto Setting Details When playing with AirPlay or Spotify Connect, or when using the Music Server function to play remotely from your PC, you can set whether to play in the main room (where this unit is located) or in a separate room (ZONE 2/ZONE 3). "Auto": When the main room input is NET, music is played in the main room. When the separate room input is NET and the main room input is other than NET, then the music is played in the separate room. "Main", "Zone 2", "Zone 3": Select when limiting the play zone to a particular room. For example, when playing only in the separate room, select "Zone 2" or "Zone 3". • This function may not work if playback is already proceeding with the same network function. 175 Front Panel≫ Rear Panel≫ Remote≫