Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 183
Standing Wave
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Surround Left 10' 0" / 3.00 m The test pulse is output from this speaker and the benchmark Front Left speaker, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. Surround Right 10' 0" / 3.00 m The test pulse is output from this speaker and the benchmark Front Right speaker, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. Surr Back Left 10' 0" / 3.00 m The test pulse is output from this speaker and the benchmark Surround Left speaker, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. Surr Back Right 10' 0" / 3.00 m The test pulse is output from this speaker and the benchmark Surround Right speaker, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. Subwoofer 1 10' 0" / 3.00 m The test pulse is output from this subwoofer and the benchmark Front Left speaker, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. Subwoofer 2 10' 0" / 3.00 m The test pulse is output from this subwoofer and the benchmark Subwoofer 1, so adjust the distance so the point where the test pulse is heard is in the middle of the two speakers. • Default values vary depending on the regions. • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m. Standing Wave This controls the affect of the standing waves that occur when sound waves reverberating off obstacles such as walls interfere with the original sound waves. Setting Item Main Center Default Value 0.0dB 0.0dB Setting Details Control the effect of standing waves for speakers other than the center speaker and the subwoofer. 1. After selecting "Filter" with / , select the filter to be adjusted from "1" to "3" with / and press ENTER. 2. After selecting the central frequency with / , adjust the bandwidth with / , then adjust the attenuation with / . The central frequency can be selected between "63Hz" and "250Hz". The bandwidth can be selected between "2.0" and "9.8" (0.2 intervals). Attenuation can be selected between "0.0dB" and "12.0dB" (0.5dB intervals). Control the effect of speaker standing waves for the center speaker. 1. After selecting "Filter" with / , select the filter to be adjusted from "1" to "3" with / and press ENTER. 2. After selecting the central frequency with / , adjust the bandwidth with / , then adjust the attenuation with / . The central frequency can be selected between "63Hz" and "250Hz". The bandwidth can be selected between "2.0" and "9.8" (0.2 intervals). Attenuation can be selected between "0.0dB" and "12.0dB" (0.5dB intervals). 183 Front Panel≫ Rear Panel≫ Remote≫