Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 147
p139
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ (*1) A center speaker or surround speakers need to be installed. (*2) If the input source is Blu-ray Disc and the speaker layout is 5.1ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected. (*3) The listening mode displayed depends on the speaker layout ( p139, 140). Furthermore, when the setting for "Speaker Virtualizer" ( p163) is "Off" (default value is On), then modes other than Atmos and Dsur cannot be selected. (*4) Surround back speakers need to be installed. Can be selected when the input format is 5.1 ch. (*5) If the input format is any of the following and the channel count is monaural, this listening mode becomes unavailable. -- DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file (*6) Cannot be selected when the IMAX Mode ( p164) is set to "Off" (the default value is Auto). (*7) Cannot be selected when the input format is monaural. (*8) Surround speakers or height speakers need to be installed. (*9) A center speaker, surround speakers, or height speakers need to be installed. (*10) Cannot be selected if "Speaker Virtualizer" ( p163) is set to "Off". (*11) Surround speakers need to be installed. (*12) You cannot select any mode other than Pure Direct, Stereo, Ext.Stereo and Ext.Mono if the sampling rate is 5.6/11.2 MHz. (*13) This can only be selected when no surround back speaker is connected. (*14) Can only be selected when the IMAX Mode ( p164) is set to "Off" (the default value is Auto). Speaker Layouts and Selectable Listening Modes ( p136) 147 Front Panel≫ Rear Panel≫ Remote≫