Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 152
Input/Output Assign, TV Out / OSD
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input/Output Assign TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Setting Item HDMI Out Dolby Vision Default Value MAIN MAIN Setting Details Select the HDMI jack to be connected with the TV. "MAIN": When connecting the TV to the HDMI OUT MAIN jack "SUB": When connecting the TV to the HDMI OUT SUB jack "MAIN+SUB": When connecting to both the MAIN and SUB jacks • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution. Select the connection point for a TV that supports Dolby Vision from "MAIN", "SUB", and "Zone 2". This setting is only necessary if you have set "HDMI Out" to "MAIN+SUB", "Zone 2 HDMI" ( p153) to "Use", and the same video is simultaneously output from multiple HDMI OUT jacks, such as when the same video from ZONE 2 is output from the MAIN or SUB HDMI OUT jacks. "MAIN": To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT MAIN jack. "SUB": To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT SUB jack. "Zone 2": To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT ZONE 2 jack. "Off": Set to "Off" if the video on the TV does not appear correctly. Setting Item 1080p -> 4K Upscaling Default Value Off Super Resolution 2 Setting Details When using a TV that supports 4K, video signals input at 1080p can be automatically upscaled to 4K for output. "Off": When this function is not used "Auto": When this function is to be used • Select "Off" if your TV does not support 4K. • If the TV does not support the 4K resolution with the same frequency as the frequency of HDMI input video signals, upscaling to 4K is not correctly performed. Check the frequency of 4K resolution supported by the TV, and change the resolution of the video signals input from the AV component. When you have set "1080p -> 4K Upscaling" to "Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong). 152 Front Panel≫ Rear Panel≫ Remote≫