Pioneer SX-255R Service Manual - Page 29

gig 11

Page 29 highlights

SX-255R, SX-205 C) MPX MODE selector button Use to select the auto stereo mode or monaural mode when listening to FM broadcasts. The monaural mode has been selected when the MONO indicator is lighted. Auto stereo mode: Normally leave in this mode for reception. When a stereo FM broadcast is received, it will be automatically reproduced in stereo sound. Monaural mode: When receiving distant stations or stations with weak broadcast signals, the input signal may be weak, thus resulting in increased noise during FM stereo broadcasts. In this event, setting the receiver to the monaural mode will reduce the noise. In this case, however, FM stereo broadcasts will be reproduced in monaural sound. NOTE: This button has no effect on reception of AM broadcasts. to Remote sensor window (SX-255R) CLASS button Use to switch between preset memory classes 1 to 3. In each class, one station can be memorized in each of the 1 to 10 stations, enabling a total of 30 stations to be memorized. O © FM/AM selector button This button is used to select either AM or FM reception. C) TUNING buttons (-,+) +: The FM or AM band is scanned in the direction of increasing frequency. -: The opposite operation to that of the + button takes place. c) STATION buttons (-,+) +: Stations change in order in the upward direction. -: Stations change in order in the downward direction. BASS tone control Use to adjust low-frequency tone. The center position is the flat (normal) position. When turned to the right, low-frequency tones are emphasized. CO TREBLE tone control Use to adjust high-frequency tone. The center position is the flat (normal) position. When turned to the right, high-frequency tones are emphasized. BALANCE control Should normally be left in the center position. Adjust balance if the sound is louder from one of the speakers. If the right side is louder, turn toward the L position and if the left side is louder, turn toward the R position. DISPLAY section 3 O O6 S.RACS MEI TAPE 2 CLASS STEREO TUNED MONO MEMORY I FM gig 111N ilA ggN il4k L0Ch I O 0 S.BASS indicator Lights up when the SUPER BASS button is pressed. TAPE 2 monitor indicator Lights up when the function buttons is set to TAPE 2 MONITOR on. 0 CLASS 1 2 3 indicator Indicates the class selected by the CLASS buton. The current CLASS is displayed. ® STEREO/MONO indicator MONO: Lights up when the FM MONO mode is selected with the MPX MODE button. STEREO: Lights up when a stereo FM broadcast is being received. O TUNED indicator Lights up when a station is tuned. MEMORY indicator 0 Character indicator 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

SX-255R,
SX-205
C)
MPX
MODE
selector
button
Use
to
select
the
auto
stereo
mode
or
monaural
mode
when
listening
to
FM
broadcasts.
The
monaural
mode
has
been
selected
when
the
MONO
indicator
is
lighted.
Auto
stereo
mode:
Normally
leave
in
this
mode
for
reception.
When
a
stereo
FM
broad-
cast
is
received,
it
will
be
automatically
reproduced
in
stereo
sound.
Monaural
mode:
When
receiving
distant
stations
or
stations
with
weak
broadcast
sig-
nals,
the
input
signal
may
be
weak,
thus
resulting
in
increased
noise
during
FM
stereo
broadcasts.
In
this
event,
setting
the
receiver
to
the
monaural
mode
will
reduce
the
noise.
In
this
case,
however,
FM
stereo
broadcasts
will
be
reproduced
in
monaural
sound.
NOTE:
This
button
has
no
effect
on
reception
of
AM
broadcasts.
to
Remote
sensor
window
(SX-255R)
CLASS
button
Use
to
switch
between
preset
memory
classes
1
to
3.
In
each
class,
one
station
can
be
memorized
in
each
of
the
1
to
10
stations,
ena-
bling
a
total
of
30
stations
to
be
memorized.
DISPLAY
section
©
FM/AM
selector
button
This
button
is
used
to
select
either
AM
or
FM
reception.
C)
TUNING
buttons
(—,+)
+:
The
FM
or
AM
band
is
scanned
in
the
direction
of
increasing
frequency.
:
The
opposite
operation
to
that
of
the
+
button
takes
place.
c)
STATION
buttons
(-,+)
+:
Stations
change
in
order
in
the
upward
direction.
:
Stations
change
in
order
in
the
downward
direction.
BASS
tone
control
Use
to
adjust
low
-frequency
tone.
The
center
position
is
the
flat
(nor-
mal)
position.
When
turned
to
the
right,
low
-frequency
tones
are
emphasized.
CO
TREBLE
tone
control
Use
to
adjust
high
-frequency
tone.
The
center
position
is
the
flat
(nor-
mal)
position.
When
turned
to
the
right,
high
-frequency
tones
are
emphasized.
BALANCE
control
Should
normally
be
left
in
the
center
position.
Adjust
balance
if
the
sound
is
louder
from
one
of
the
speakers.
If
the
right
side
is
louder,
turn
toward
the
L
position
and
if
the
left
side
is
louder,
turn
toward
the
R
position.
S.RACS
3
O
O
TAPE
2
CLASS
MEI
STEREO
MONO
MEMORY
TUNED
6
I
FM
gig 11
1N
il
A
ggN
il
4k
L0Ch
I
O
0
S.BASS
indicator
Lights
up
when
the
SUPER
BASS
button
is
pressed.
TAPE
2
monitor
indicator
Lights
up
when
the
function
buttons
is
set
to
TAPE
2
MONITOR
on.
0
CLASS
1
2
3
indicator
Indicates
the
class
selected
by
the
CLASS
buton.
The
current
CLASS
is
displayed.
®
STEREO/MONO
indicator
MONO:
Lights
up
when
the
FM
MONO
mode
is
selected
with
the
MPX
MODE
button.
STEREO:
Lights
up
when
a
stereo
FM
broadcast
is
being
received.
O
TUNED
indicator
Lights
up
when
a
station
is
tuned.
MEMORY
indicator
0
Character
indicator
37