Pioneer VSX-21 Operating Instructions - Page 51

SET UP Other Operations Background Control of Other Components The following steps show you how to control one component while listening to another. This may be useful if you want to rewind a tape while listening to CD, etc. 1 2,3,5 RECEIVER TV MUTING FQ TV FUNC + ENTER - FQ VOL VOL CHANNEL MULTI CONTROL DVD/LD TV/SAT CD VCR 1 TVCONTROL TUNER VCR 2 RECEIVER MD/TAPE DSP MODE MIDNIGHT 12 34 CH.SELECT TEST TONE ATT SIG.SELECT 56 7 8 CN.LEVEL 90 EFFECT +10 MEMU CLASS TV/VCR FUNCTION DIRECT FL DIMMER MODE CHECK COMMANDER SET UP Î AUDIO/VIDEO PRE-PROGRAMMED REMOTE CONTROL UNIT 1 Select a component, then start playback. For example: Press FUNCTION to select the CD player, then press the CD button,and start playing a CD. (You should hear the sound of the CD playing back.) 2 Press MODE CHECK to display the current operation mode. The corresponding MULTI CONTROL button lights up. For example: The CD button should light up to indicate that the remote is set to operate the CD player. 3 Press MODE CHECK repeatedly to select another operation mode. Each time you press MODE CHECK, the next MULTI CONTROL button should light, enabling you to operate the selected device. For example: Press repeatedly to light the MD/TAPE button. The receiver's function remains set to CD (and you should still hear the CD player), but the remote control is now set to operate the tape deck. 4 Perform the desired operation(s). The remote control remains in the selected operation mode, so you may perform as many operations as necessary. For example : Press 1 to rewind the tape. 5 Press MODE CHECK repeatedly to switch back to the original operation mode. You can also switch back to the original operation mode by pressing the corresponding MULTI CONTROL button. For example : Press MODE CHECK repeatedly to light the CD button, or press the CD button. OPERATION 51