Polaroid FLM 2011 Operation Manual - Page 14

Installation(continued) The PC input signal connection Connect the VGA(D-sub) input interface on the TV to the output of a PC through the D-sub 15 pin cable as illustrated. For the audio connection, use an audio cord that matches the audio output terminal on the computer. If you select PC signal, please set the input signal source of LCD TV to VGA mode. To VGA output IIIIIIIIIIIII IIIIIIIIIIIII To audio output Equipment with VGA output To VGA input To audio input Notes: 1.The native display resolution is 640 x 480. If the signal resolution exceeds this resolution, it may not be possible to show fine detail with sufficient clarity. 2. We strongly recommend that you set the refresh rate on the PC to 60Hz. If you set it above 60Hz, the unit may not display correctly. (Control Panel/Display Settings) 3. Use the OSD to make final image adjustments. 11