Poulan 1400T User Manual - Page 11

D. OPERATING INSTRUCTIONS 1. Bringtheenginetocuttingspeed beforeenteringthe material to be cut. a. Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds there is less engine noise and vibration. The trimmer line will last longer and will be less likely to "weld" onto the spool. b. If the Trimmer Head does not turn when the engine is accelerated, make sure the Drive Shaft Housing is properly seated in the Engine Shroud. Refer to `Assembly-Drive Shaft Housing!' 2. To stop the engine: a. Release the Throttle Trigger. b. Push "Off" Button. Hold button down until the engine stops. Figure 9. PUSH "OFF^ BUTTON TO STOP ENGINE Salmi Na necormAs...i IMPOIrT4W,I. I 2 pm a ksbe mSe OrTaliNIMITT !WIMP" LA 711211 Figure 9 USING YOUR TRIMMER THROWN OBJECT AWARNING THROWSOBJECTS The rapidly moving line causes objects to be thrown violently. The shield will not provide complete protection to the operator or others. The operator must wear a safety face shield or goggles. Always wear heavy, long pants and boots. Keep others at least 30 feet away. 60 FO171 '.. ..NAL/ 1121 ,O21) AWARNING HAZARDZONE This tool will throw objects and cut. Keep others including children,animals,bystanders, and helpersat least 30 feet away from the operatorand tool.Stoptheengine if youare approached. 'Pap-N-Go HTM Trimmer Head M52-'701604 Use Only Genuine Weed Eater® Parts AWARNING DAMAGED TRIMMER HEAD Trimmer head parts that are chipped, cracked, or damaged in any way can fly apart and cause serious injury. Do not use. Throw damaged parts away. Replace damaged parts before using the tool. 11