ProForm 250i Elliptical English Manual - Page 10

Attach the Left Upper Body Arm 4 to

Get ProForm 250i Elliptical PDF manuals and user guides View all ProForm 250i Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

7. Identify the Right Upper Body Arm (3) and the Right Upper Body Leg (5), and orient them as 7 shown. Insert the Right Upper Body Arm (3) into the Right Upper Body Leg (5). Attach the Right Upper Body Arm with three M8 x 38mm Bolts (59) and three M8 Locknuts (60); make sure that the Locknuts are in the hexagonal holes (C). Start all of the Bolts, and then tighten 4 them. Attach the Left Upper Body Arm (4) to the Left Upper Body Leg (6) in the same way. 3 C 60 60 59 59 6 5 8. Slide the Right Upper Body Arm (3) onto the right side of the Upright Axle (18). Slide the Left Upper Body Arm (4) onto the left side of the Upright Axle (18). Tighten an M8 x 20mm Screw (61) and an M8 Washer (63) into each end of the Upright Axle (18) at the same time. 8 4 61 63 18 3 63 61 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
10
7
59
59
60
C
60
3
6
5
4
7.
Identify the Right Upper Body Arm (3) and the
Right Upper Body Leg (5), and orient them as
shown.
Insert the Right Upper Body Arm (3) into the
Right Upper Body Leg (5). Attach the Right
Upper Body Arm with three M8 x 38mm Bolts
(59) and three M8 Locknuts (60);
make sure
that the Locknuts are in the hexagonal holes
(C). Start all of the Bolts, and then tighten
them.
Attach the Left Upper Body Arm (4) to the
Left Upper Body Leg (6) in the same way.
61
61
18
63
63
8.
Slide the Right Upper Body Arm (3) onto the
right side of the Upright Axle (18).
Slide the Left Upper Body Arm (4) onto the left
side of the Upright Axle (18).
Tighten an M8 x 20mm Screw (61) and an M8
Washer (63) into each end of the Upright Axle
(18)
at the same time.
8
4
3