ProForm 280 Razor Instruction Manual - Page 10

10. Identify the Left Pedal (12), which is marked with a "Left" sticker, and orient it as shown. Attach the Left Pedal (12) to the left Pedal Arm (14) with three M10 x 70mm Button Screws (75), three M10 Split Washers (78), and an M4 x 16mm Screw (94). Repeat this step for the Right Pedal (13) and the right Pedal Arm (14). 10 12 14 78 78 75 94 14 13 11. Identify the Left Upper Body Arm (8), which is marked with a "Left" sticker. 11 Orient the Left Upper Body Arm (8) and an Upper Body Leg (6) as shown. Make sure that the hexagonal holes and the wide side of the Upper Body Leg are in the indicated locations. Slide the Left Upper Body Arm (8) onto the Upper Body Leg (6). Attach the Left Upper Body Arm (8) with two M6 x 36mm Button Bolts (76) and two M6 Locknuts (77). Make sure that the Locknuts are inside the hexagonal holes. Repeat this step for the Right Upper Body Arm (not shown) and the other Upper Body Leg (not shown). 8 76 Hexagonal Holes 77 Wide Side 6 10