ProForm 280 Razor Instruction Manual - Page 11

12. Apply a generous amount of the included grease to the axles on the Upright (2). Then, 12 apply a small amount of grease to two Wave Washers (88). Orient an Inner Arm Cover (22) and the right Upper Body Leg (6) as shown. Slide the Inner Arm Cover (22) and the right Upper Body Leg (6) onto the right side of the Upright (2). Slide a Wave Washer (88) onto the axle on the right side of the Upright (2). Attach the right Upper Body Leg (6) with an M6 6 x 16mm Patch Screw (80) and an M6 Washer (35). Make sure that the Wave Washer (88) is on the axle. Attach the left Upper Body Leg (6) in the same way. 22 2 Grease 88 Grease 80 35 6 13. Attach an Outer Arm Cover (20) around the left Upper Body Leg (6) with two M4 x 16mm 13 Screws (94). Attach the other Outer Arm Cover (20) around the right Upper Body Leg (6) in the same way. 20 20 6 94 6 11