ProForm 280 Razor Instruction Manual - Page 12
Button Screws.
View all ProForm 280 Razor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
14. Apply a small amount of grease to the barrel of an M6 x 72mm Shoulder Bolt (21). 14 Have another person hold the right Pedal Arm (14) inside the bracket on the right Upper Body Leg (6). Attach the right Pedal Arm (14) to the right Upper Body Leg (6) with the M6 x 72mm Shoulder Bolt (21), an M6 Washer (35), and an M6 Locknut (77). Repeat this step for the left side of the elliptical exerciser. See step 3. Tighten the four M10 x 20mm Button Screws (79). Tip: Tighten the two Button Screws on the front of the elliptical exerciser before tightening the other two Button Screws. 15. Identify the Right Inner Leg Cover (32) and the Right Outer Leg Cover (30), which are marked 15 with "Right" stickers. Attach the Right Inner Leg Cover (32) and the Right Outer Leg Cover (30) around the right Upper Body Leg (6) with three M4 x 16mm Round Head Screws (84). Repeat this step for the left side of the elliptical exerciser. 77 6 35 Grease 21 14 84 32 84 6 30 16. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 12