ProForm 380 F Elliptical English Manual - Page 8

5. The Console (4) can use four 1.5V D batteries (not included); alkaline batteries are recommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 5 4 Screws 6. While a second person holds the Console (4) near the Upright (2), connect the console wire 6 to the Wire Harness (100). Tip: Avoid pinching the wires. Attach the Console (4) with four M4 x 16mm Flat Head Screws (94). Cover Batteries 4 Console Wire 100 Avoid pinching the wires 2 96 94 94 7. Slide the Console Cover (96) (see the drawing in step 6) upward to the Console (4). Attach the 7 Console Cover with two M4 x 16mm Screws (84). 4 96 84 8