ProForm 475 E Elliptical English Manual - Page 11

11. Apply grease to a Short Axle (19). Slide the Right Pedal Arm (9) onto the Right Roller Arm (7) as shown, and insert the Short Axle (19) into both parts. Then, tighten an M8 x 20mm Screw (61) with an M8 Washer (63) into each end of the Short Axle (19) at the same time. Attach the Left Pedal Arm (10) to the Left Roller Arm (8) in the same way. 11 61 63 10 8 7 9 19 Grease 63 61 12. The Console (30) can use four D batteries (not included); alkaline batteries are recommended. Do not use old and new batteries together or alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery covers from the back of the Console, and insert batteries into the battery compartments. Make sure to orient the batteries as shown by the diagrams inside the battery compartments. Then, reattach the battery covers. To purchase an optional power adapter, call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied regulated power adapter. Plug one end of the power adapter into the receptacle inside the battery compartment on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 12 Battery Cover 30 Battery Cover Receptacle 11