ProForm 480 Cse Elliptical English Manual - Page 12
How To Use The Elliptical Exerciser
View all ProForm 480 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE THE ELLIPTICAL EXERCISER HOW TO MOVE AND LEVEL THE ELLIPTICAL EXERCISER To move the elliptical exerciser, stand in front of it, place one foot against one of the wheels, and firmly hold the upper end of the upright. Pull the upright forward until you can move the elliptical exerciser on the wheels. Carefully move the elliptical exerciser to the desired location and then lower it. To decrease the risk of injury, do not attempt to move the elliptical exerciser over an uneven surface. HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER To mount the elliptical exerciser, firmly hold the upper body arms and carefully step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal discs can turn in either direction. It is recommended that you turn the pedal discs in the direction shown below; however, for variety, you can turn the pedal discs in the opposite direction. Upright Handlebar Wheel Leveling Foot Pedal Disc If the elliptical exerciser rocks slightly on your floor, turn one or both of the leveling feet under the front stabilizer until the rocking motion is eliminated. HOW TO ADJUST THE RAMP INCLINE To adjust the incline level of the ramp, pull the ramp handle, move the ramp to the desired incline level, and engage the ramp pin into one of the holes in the frame. Ramp Handle Ramp Frame Pedal To dismount the elliptical exerciser, allow the pedals to come to a complete stop. The elliptical exerciser does not have a freewheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the higher pedal first. Then, step off the lower pedal. 12