ProForm 480 Cse Elliptical English Manual - Page 9

7. Apply a generous amount of the included grease to the Pivot Axle (45). Then, apply a small amount of grease to two 22mm x 16.5mm Wave Washers (70). Slide the Pivot Axle (45) through the Upright (2). Then, orient an Upper Body Leg Spacer (43) and an Upper Body Leg (9) as shown and slide them onto the left side of the Pivot Axle. Attach the left Upper Body Leg (9) with an M8 x 25mm Patch Screw (83), an M8 Washer (80), and one of the 22mm x 16.5mm Wave Washers (70). Do not tighten the Patch Screw yet. 7 83 80 70 45 Grease 9 2 43 8. Orient an Upper Body Leg Spacer (43) and an Upper Body Leg (9) as shown and slide 8 them onto the right side of the Pivot Axle (45). Attach the right Upper Body Leg (9) with an M8 x 25mm Patch Screw (83), an M8 Washer (80), and the other 22mm x 16.5mm Wave Washer (70). Do not tighten the Patch Screw yet. 45 43 Grease 70 80 83 9 9