ProForm 480 Cse Elliptical English Manual - Page 6
Attach the Front Stabilizer 3 to the Frame
View all ProForm 480 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser. Press a Stabilizer Cap (19) onto each end of the Rear Stabilizer (4). Attach the Rear Stabilizer (4) to the Frame (1) with two M10 x 75mm Carriage Bolts (65) and two M10 Locknuts (77). 1 65 19 1 4 77 2. Orient the Front Stabilizer (3) so that the Wheels (21) are in the position shown. 2 Press a Stabilizer Cap (19) onto each end of the Front Stabilizer (3). Attach the Front Stabilizer (3) to the Frame (1) with two M10 x 75mm Carriage Bolts (65) and two M10 Locknuts (77). 77 19 1 77 65 19 21 65 21 3 19 6
6
1.
Press a Stabilizer Cap (19) onto each end of
the Rear Stabilizer (4).
Attach the Rear Stabilizer (4) to the Frame (1)
with two M10 x 75mm Carriage Bolts (65) and
two M10 Locknuts (77).
2.
Orient the Front Stabilizer (3) so that the
Wheels (21) are in the position shown.
Press a Stabilizer Cap (19) onto each end of
the Front Stabilizer (3).
Attach the Front Stabilizer (3) to the Frame
(1) with two M10 x 75mm Carriage Bolts (65)
and two M10 Locknuts (77).
77
19
19
1
4
65
3
1
77
77
65
65
19
19
21
21
2
To make assembly easier, read the
information on page 5 before you
begin assembling the elliptical
exerciser.
1