ProForm 480 Cse Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8 Small Washer (88)-2 M6 Large Washer (87)-4 M8 Washer (80)-2 22mm x 16.5mm Wave Washer (70)-6 23mm x 19.5mm Wave Washer (49)-2 Crank Arm Spacer (25)-2 M8 Locknut (79)-6 M10 Locknut (77)-4 M4 x 16mm Screw (84)-4 M4 x 19mm Self-tapping Screw (95)-6 M4 x 25mm Self-tapping Screw (92)-2 M6 x 16mm Patch Screw (96)-4 M8 x 25mm Patch Screw (83)-4 M8 x 45mm Button Bolt (71)-4 M8 x 70mm Button Bolt (66)-2 M10 x 75mm Carriage Bolt (65)-4 5