ProForm 5.2 Treadmill Uk Manual - Page 10
The Console May Be Damaged When
View all ProForm 5.2 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. With the help of a second person, hold the console assembly near the Handrail Base (96). Connect the Handrail Wire (52) to the console wire. See the lower inset drawing in step 8. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Connect the Console Ground Wire (101) to the console assembly ground wire. Insert the wires into the console assembly. Attach the console assembly with three 3/8" x 2 3/4" Bolts (5) and three 3/8" Star Washers (9). Be careful not to pinch the wires. 10 Console Assembly Console Wires 52 101 96 9 5 11. Identify the Storage Latch (53). Remove the tie from the end of the tube. Make sure that the sleeve has been slid over the indicated hole and that the Latch Knob (54) is locked into the indicated hole. Pull on the sleeve to make sure that it is locked into place. 11 Tube 54 Hole Sleeve 53 10