ProForm 690 Hr Elliptical Uk Manual - Page 6

Attach the Rear Stabilizer 7 to the Frame 2

Get ProForm 690 Hr Elliptical PDF manuals and user guides View all ProForm 690 Hr Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

1. To make assembly easier, read the information on page 5 before you begin. While another person lifts the Base (1), attach the Front Stabilizer (6) to the Base with two M10 x 80mm Carriage Bolts (82) and two M10 Locknuts (81). 1 82 6 81 81 1 2. Remove the indicated screw and the shipping bracket from the Base (1). Discard the screw 2 and the shipping bracket. Next, turn the Base Foot (26) into the Base (1) as far as possible. 3. Attach the Rear Stabilizer (7) to the Frame (2) with two M10 x 127mm Button Screws (83). 3 Next, hold the handle on the Frame (2) and press the Latch Button (68). Then, lower the Frame until the Rear Stabilizer (7) rests on the floor. 1 26 Screw 83 7 Handle Shipping Bracket 2 68 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
6
1.
While another person lifts the Base (1), attach
the Front Stabilizer (6) to the Base with two
M10 x 80mm Carriage Bolts (82) and two M10
Locknuts (81).
2.
Remove the indicated screw and the shipping
bracket from the Base (1). Discard the screw
and the shipping bracket.
Next, turn the Base Foot (26) into the Base (1)
as far as possible.
3.
Attach the Rear Stabilizer (7) to the Frame (2)
with two M10 x 127mm Button Screws (83).
Next, hold the handle on the Frame (2) and
press the Latch Button (68). Then, lower the
Frame until the Rear Stabilizer (7) rests on the
floor.
6
81
81
82
1
1
Shipping
Bracket
26
Screw
3
83
7
Handle
2
68
2
1
To make assembly easier, read the
information on page 5 before you begin.