ProForm 785 Watts Bike Uk Manual - Page 20

Maintenance And Troubleshooting

Page 20 highlights

MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the exercise cycle regularly. The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight. TIGHTENING THE PEDALS HOW TO ADJUST THE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is at the highest level, the belt may need to be adjusted. To adjust the belt, first remove all the screws from the left and right side shields. Then, carefully pull the side shields apart. For best performance, regularly tighten both pedals. HOW TO LEVEL THE EXERCISE CYCLE Next, turn the indicated M8 Nylon Jam Nut (43) until the Belt (28) is properly tightened and the pedals no longer slip. Then, reattach the side shields. If the exercise cycle rocks slightly on your floor, turn one or both of the leveling feet beneath the rear sta- bilizer until the exercise cycle is level. Leveling Feet 28 43 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

20
Inspect and properly tighten all parts of the exercise
cycle regularly. The exercise cycle can be cleaned
with a soft, damp cloth. To prevent damage to the con-
sole, keep liquids away from the console and keep the
console out of direct sunlight.
TIGHTENING THE PEDALS
For best performance, regularly tighten both pedals.
HOW TO LEVEL THE EXERCISE CYCLE
If the exercise cycle
rocks slightly on your
floor, turn one or both
of the leveling feet
beneath the rear sta-
bilizer until the exer-
cise cycle is level.
HOW TO ADJUST THE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is at the highest level, the
belt may need to be adjusted. To adjust the belt, first
remove all the screws from the left and right side
shields. Then, carefully pull the side shields apart.
Next, turn the indicated M8 Nylon Jam Nut (43) until
the Belt (28) is properly tightened and the pedals no
longer slip. Then, reattach the side shields.
Leveling
Feet
MAINTENANCE AND TROUBLESHOOTING
28
43