ProForm 980 Cs Treadmill English Manual - Page 7

1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip 38 the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the ties securing the Upright Wire (38) to the Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Foot (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Foot Spacer (13). Then, attach another Base Foot (81) with only a #8 x 1" Tek Screw (2). 56 13 81 2 2. Attach a Wheel (84) to the Base (83) with a 3/8" 2 x 2" Bolt (4) and a 3/8" Nut (8). Do not over- tighten the Nut; the Wheel must turn freely. 83 4 83 Hole 81 2 84 8 3. Identify the Right Upright (78) and the Right 3 Upright Spacer (79). 78 Insert the Upright Wire (38) through the Right Upright Spacer (79) as shown. Then, set the Right Upright Spacer on the Base (83). Be care- 38 ful not to pinch the Upright Wire. 38 Have a second person hold the Right Upright (78) near the Base (83). See the inset drawing. 79 Long Tie Tie the long tie in the Right Upright securely around the end of the Upright Wire (38). Then, pull the other end of the long tie until the Upright Wire is routed completely through the Right 83 Upright. 78 38 Long Tie 7