ProForm 990 Cs Treadmill English Manual - Page 10

Attach the Base Cover 84 to the Base 94

Page 10 highlights

7. Attach the Base Cover (84) to the Base (94) with four #8 x 1/2" Screws (1). Be careful not to overtighten the Screws. With the help of a second person, tip the treadmill so that the Base (94) is flat on the floor. 7 1 84 1 94 1 1 8. Identify the Left Handrail (78). Slide a Handrail Cover (77) onto the lower end of the Left 8 Handrail. Remove the tie from the bracket on the Left Handrail. If necessary, press the Cage Nut (27) back into place. Insert the bracket on the Left Handrail (78) into the top of the Left Upright (82) and at the same time slide the lower end of the Left Handrail onto the bracket on the Left Upright. Start two 5/16" x 3/4" Screws (5) with two 5/16" Star Washers (9) into the Left Upright (82) and the Left Handrail (78). Then, start a 5/16" x 1 1/2" Bolt (4). Do not tighten the Screws and Bolt yet. Start a 1/4" x 1/2" Screw (8) into the lower end of the Left Handrail (78). Tighten the Bolt and all three Screws used in this step. Slide the Handrail Cover (77) against the Left Upright (82). 27 4 78 Bracket 9 5 82 8 77 Bracket 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
8.
Identify the Left Handrail (78). Slide a Handrail
Cover (77) onto the lower end of the Left
Handrail. Remove the tie from the bracket on
the Left Handrail. If necessary, press the Cage
Nut (27) back into place.
Insert the bracket on the Left Handrail (78) into
the top of the Left Upright (82) and at the same
time slide the lower end of the Left Handrail onto
the bracket on the Left Upright.
Start two 5/16" x 3/4" Screws (5) with two 5/16"
Star Washers (9) into the Left Upright (82) and
the Left Handrail (78). Then, start a 5/16" x 1
1/2" Bolt (4).
Do not tighten the Screws and
Bolt yet.
Start a 1/4" x 1/2" Screw (8) into the lower end
of the Left Handrail (78).
Tighten the Bolt and
all three Screws used in this step.
Slide the
Handrail Cover (77) against the Left Upright
(82).
78
4
27
Bracket
Bracket
5
9
8
77
82
8
7.
Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1).
Be careful not
to overtighten the Screws.
With the help of a second person, tip the tread-
mill so that the Base (94) is flat on the floor.
84
94
1
1
1
1
7