ProForm 990 Cs Treadmill English Manual - Page 13
Lower the Frame 55 see HOW TO LOWER
View all ProForm 990 Cs Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Turn on the power (see page 16). See step 4 on page 17 and lower the incline to the low- 13 est position. Then, remove the key from the 55 6 console, press the power switch into the off po- sition, and unplug the power cord. Raise the Frame (55) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are positioned as shown. Attach the lower end of the Storage Latch (51) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (10). Attach the upper end of the Storage Latch (51) to the Frame (55) with a 3/8" x 1 3/4" Screw (6). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Frame. Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 24). Latch Knob 51 Large Barrel 10 94 3 14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27). 13