ProForm Smart Strider 6.5 Elliptical English Manual - Page 7
Assembly - - assembly required
View all ProForm Smart Strider 6.5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.proform.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Care (see the front cover of this manual) and register your product. 2. With the help of another person, place some sturdy packing materials under the rear of the 2 Frame (1) so that the Frame is lifted off the floor. Have the other person hold the elliptical to prevent it from tipping. If there are shipping supports attached to the rear of the Frame (1), remove the screws attaching the shipping supports. Discard the screws and the shipping supports. Attach the Rear Stabilizer (70) to the Frame (1) with two M10 x 120mm Screws (84). 70 Then, remove the packing materials and lower the elliptical. 1 84 7