ProForm Tdf 1.0 Instruction Manual - Page 10

Tip: Avoid pinching the Main Wire 68 during, this step., Make sure that the Post Knob is in an,

Get ProForm Tdf 1.0 PDF manuals and user guides View all ProForm Tdf 1.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

8. Tip: Avoid pinching the Main Wire (68) during this step. Locate the Post Knob (47) near the front of the Frame (2). Loosen the Post Knob, and then pull it outward. Next, insert the Handlebar Post (6) into the Frame (2), and release the Post Knob (47) into one of the adjustment holes in the Handlebar Post. Make sure that the Post Knob is in an adjustment hole. Then, tighten the Post Knob. 8 Avoid pinching the Main Wire (68) 6 68 2 47 9. Have a second person hold the Handlebar (7) near the Handlebar Carriage (105). 9 Locate the remaining wire tie (E) in the Handlebar Carriage (105). Tie the indicated end of the wire tie to the two wires (F) on the Handlebar (7). Next, pull the other end of the wire tie (E) until the two wires (F) are routed through the Handlebar Carriage (105). Then, untie and discard the wire tie. 7 F 105 E 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
10
8
47
68
6
2
8.
Tip: Avoid pinching the Main Wire (68) during
this step.
Locate the Post Knob (47) near the front of the
Frame (2). Loosen the Post Knob, and then pull
it outward.
Next, insert the Handlebar Post (6) into the
Frame (2), and release the Post Knob (47) into
one of the adjustment holes in the Handlebar
Post.
Make sure that the Post Knob is in an
adjustment hole.
Then, tighten the Post Knob.
Avoid pinching the
Main Wire (68)
9
105
7
9.
Have a second person hold the Handlebar (7)
near the Handlebar Carriage (105).
Locate the remaining wire tie (E) in the
Handlebar Carriage (105). Tie the indicated
end of the wire tie to the two wires (F) on the
Handlebar (7).
Next, pull the other end of the wire tie (E)
until the two wires (F) are routed through the
Handlebar Carriage (105). Then, untie and
discard the wire tie.
E
F