ProForm Xp210 U Bike English Manual - Page 11

Attach the Water Bottle Holder 49 to

Get ProForm Xp210 U Bike PDF manuals and user guides View all ProForm Xp210 U Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

12. While a second person holds the Console (6) near the Console Plate (19), connect the wires 12 on the Console to the Main Wire (31) and to the Pulse Wire (52). Insert the excess wire into the Console Plate (19) or into the Console (6). Tip: Avoid pinching the wires. Attach the Console (6) to the Console Plate (19) with four M4 x 16mm Screws (40). 6 52 31 19 40 13. Attach the Water Bottle Holder (49) to the Upright (3) with two M4 x 22mm Screws (54). 13 14. Identify the Right Pedal (26). Using an adjustable wrench, firmly tighten the Right Pedal clockwise 14 into the right arm of the Crank (13). Tighten the Left Pedal (not shown) counterclockwise into the left arm of the Crank (not shown). Adjust the strap on the Right Pedal (26) to the desired position, and press the end of the strap onto the tab on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 49 3 54 Strap 13 26 Tab 15. Make sure that all parts of the exercise bike are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the exercise bike. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
11
12
13
12. While a second person holds the Console (6)
near the Console Plate (19), connect the wires
on the Console to the Main Wire (31) and to the
Pulse Wire (52).
Insert the excess wire into the Console Plate
(19) or into the Console (6).
Tip: Avoid pinching the wires.
Attach the
Console (6) to the Console Plate (19) with four
M4 x 16mm Screws (40).
6
19
31
40
52
3
49
26
Strap
Tab
13
54
13. Attach the Water Bottle Holder (49) to the
Upright (3) with two M4 x 22mm Screws (54).
14. Identify the Right Pedal (26). Using an adjustable
wrench, firmly tighten the Right Pedal
clockwise
into the right arm of the Crank (13).
Tighten the Left Pedal (not shown)
counter-
clockwise
into the left arm of the Crank (not
shown).
Adjust the strap on the Right Pedal (26) to the
desired position, and press the end of the strap
onto the tab on the Right Pedal.
Adjust the
strap on the Left Pedal (not shown) in the
same way.
15.
Make sure that all parts of the exercise bike are properly tightened.
Note: Extra parts may be included.
To protect the floor or carpet from damage, place a mat under the exercise bike.
14