ProForm Xp210 U Bike English Manual - Page 7
Tip: Avoid pinching the Main Wire 31.
 |
View all ProForm Xp210 U Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Upright (3) as shown. Have a second person hold the Upright near the Frame (1). 3 Locate the wire tie in the lower end of the Upright (3). Tie the wire tie to the Main Wire (31). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (31) from falling into the Upright (3), secure the Main Wire with the wire tie. Wire Tie 3 Wire Tie 31 1 4. Tip: Avoid pinching the Main Wire (31). Set the Upright (3) on the Frame (1). Attach the Upright (3) with four M8 x 25mm Screws (44) and four M8 Split Washers (45). Tip: Start all the Screws, and then tighten them. 4 31 Avoid pinching the Main Wire (31) 3 44 45 44 45 1 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
7
3.
Orient the Upright (3) as shown. Have a second
person hold the Upright near the Frame (1).
Locate the wire tie in the lower end of the Upright
(3). Tie the wire tie to the Main Wire (31). Then,
pull the upper end of the wire tie until the Main
Wire is routed through the Upright.
Tip: To prevent the Main Wire (31) from fall-
ing into the Upright (3), secure the Main Wire
with the wire tie
.
3
4
1
1
3
3
44
44
45
45
31
31
Wire Tie
Wire Tie
Avoid pinching the
Main Wire (31)
4.
Tip: Avoid pinching the Main Wire (31).
Set
the Upright (3) on the Frame (1).
Attach the Upright (3) with four M8 x 25mm
Screws (44) and four M8 Split Washers (45).
Tip: Start all the Screws, and then tighten
them.